Tektronix P7313, Differential Probe, sold with EQT added probe support and pin kit #

Unit is tested and in good working and cosmetic condition. Please see pictures!

Reference pictures only, please ask for unit’s specific pictures!

Two (2) pc available!

Condition: Tested good
Serial number: B014124, B011053

General description (Retrieved 10/24, Tektronix)
Note: Unit specific features depend on installed options. Please see unit pictures for options!

Key features

• Signal fidelity

  • >12.5 GHz Bandwidth (P7313, typical)

  • >8.0 GHz Bandwidth (P7380A, typical)

  • >6.0 GHz Bandwidth (P7360A, typical)

  • >4.0 GHz Bandwidth (P7340A, typical)

• Extended linear dynamic range

  • 1.25 Vp-p at 5x Attenuation (P7313)

  • 4 Vp-p at 25x Attenuation (P7313)

  • 2 Vp-p at 5x Attenuation (P7380A, P7360A, P7340A)

  • 5 Vp-p at 25x Attenuation (P7380A, P7360A, P7340A)

• Low probe loading

  • DC Input resistance

    • 100 kΩ Differential

    • 50 kΩ Single ended

  • AC Loading

    • Zmin >200 Ω out to 10 GHz (P7313)

    • Zmin >290 Ω, 4 GHz to 8 GHz (P7380A, P7360A, P7340A)

• Versatility

  • Make differential or single-ended (ground-referenced) measurements 1

  • Solder-down capability

  • Handheld probing with variable spacing and compliance

  • Fixtured probing

• Interchangeable Tip-Clip™ assemblies

  • Connect to a variety of devices

  • Economical

• TekConnect® interface

Applications

Examples include, but are not limited to:

• MIPI® D-PHY/C-PHY, LPDDR2/3, PCI-Express, Serial ATA, USB

Z-Active probing architecture for high-speed probing applications
Tektronix created the Z-Active probe architecture and set the industry benchmark for signal fidelity. Tektronix active probe architecture preserves high bandwidth while providing improved connectivity with low loading and low noise. The Z-Active architecture is a hybrid approach composed of a distributed attenuator topology feeding an active probe amplifier.
The Z-Active probes use a tiny passive probe tip element that is separate from the amplifier, extending the usable reach of the probe. In traditional active probes, adding this much length can introduce signal fidelity problems. However this architecture maintains high DC input resistance and presents a higher AC impedance than other probe architectures. It accomplishes this while providing significant length between the probe body and the probe attachment point to the DUT. This architecture provides the best of both worlds: high DC impedance like existing active probes and the stable high-frequency loading of Z0 probes.

Signal fidelity
You can be confident in the signal fidelity of your measurements because the Z-Active architecture provides:

• High bandwidth

• Excellent step response

• Low loading

• Low noise

• High CMRR

• Extended linear dynamic range

Low loading
Circuits designed for low power consumption can operate in unterminated modes with high impedance. Probing these buses in low power mode requires a probe with high impedance at low and medium frequencies. The Z-Active probes provide high impedance inputs that minimize the probe's loading on low power circuits.

Extended linear dynamic range
Many of today’s logic signals and serial bus signals require the capability to measure up to several volts peak to peak. These voltage levels may easily be viewed with the Z-Active architecture probes (P7380A, P7360A, and P7340A) with the extended linear dynamic range. With a 2.0 Vp-p linear dynamic input range at the 5x attenuation setting, you can accurately measure MIPI D-PHY and C-PHY, LPDDR2 and LPDDR3, and PCI-Express signals at reduced noise levels. In addition the 25x attenuation setting’s linear dynamic input voltage range can be used up to 5.0 Vp-p for accessing even larger signal swings found during transition times.

Versatile connectivity
The Z-Active probe design allows the probe to easily switch between soldered, handheld, or fixtured applications. This family of probes uses Tip-Clip™ assemblies, an interchangeable probe tip system that enables engineers to configure their probe with the optimal tip for their application. These detachable assemblies make it possible to replace a tip for a fraction of the cost formerly associated with such hardware changes. Tip-Clips are available in several lengths and with variable tip spacing to provide flexibility for adapting to vias and other test points of differing sizes. With Tektronix Tip-Clip assemblies, Monday's solder-in probe can become Tuesday's handheld tool, simply by switching tips.

Value
The combination of the Z-Active architecture and the Tip-Clip assemblies provide superior signal fidelity at a cost-effective price. The inexpensive Tip-Clip assemblies enable full-performance solder connections at a very low price per connection. Over the life of a probe this can add up to significant savings in the cost of operation.

Please contact us for the unit's datasheet!  

Terms & Conditions

_____________________________________________________   

This sale includes the equipment ONLY.
No other parts or accessories will be included unless otherwise mentioned in the sales notification.

 Payment

Full payment is due within 3 business days from sale unless separately agreed otherwise in advance.

Please note that all prices are VAT (tax) excluded and EXW Finland office (EXW = Ex Works).

In case you are:

- A private purchaser / consumer inside EU, please note that VAT (tax) will be added to the total price. Tax rate (%) is determined by the destination country, same as given in the delivery address.

- A business buyer inside EU (except Finnish companies), please provide us your valid VAT number and the price stays the same (no VAT added)

- Outside European Community VAT is not applied

- Finnish companies & private consumer tax (VAT 24%) will be added to the price

Shipping and Handling

International shipping is available!

All items are packaged with care to ensure full protection during transit.

We ship packages with Fedex and freight with TNT unless requested otherwise.

*All courier shipments are insured based on the unit’s value and not weight*

Letters can be selected to shipped with either standard postal services (no insurance nor tracking code) or with courier services (includes the insurance and tracking code).

Most items are Shipped within 2 business days of cleared payment.

Orders placed after 10 a.m. GMT+2  Friday will ship the following Monday

Please note that the goods are sold “as is, where is” basis, EXW Raisio, Finland (Incoterms 2010), if not mentioned otherwise.

Buyer is responsible for taxes, duties and other possible import charges.

Warranty and Returns

A 5 Star Positive Rating is important to us!

Contact us within 14 days after receiving the purchased unit to request a refund if you notice any failure (If the item includes warranty). Please explain the failure in details with pictures included and pack the unit to the same box it was delivered to you. We will order a return ticket for the failing unit. We will issue the full refund of the unit price after receiving the unit back to us. Please note that as a buyer you are responsible for the return shipping & handling charges.

If the product is damaged due to the Buyer's mis-handling or return shipping process, we will not refund, and we will notify eBay for return policy abuse.

AS-IS items are sold without warranty 

Buyer pays shipping charges for returned items

Contact Us

Contact us if you have any questions regarding items or shipping.

Please visit our, EQT-Solutions’ web page to find additional assets.

Business hours and details: We will reply your message as quickly as we can.

However, please refer to our business hours in Finland: 8:30 - 16:00.